Eddy Posted May 1, 2012 Report Posted May 1, 2012 *Blatantly copied from RMPO posts* Please note that I have not yet been through it all, some info needs to be updated. I will try to get it done as time permits. Also I will try to find my original G60 Bible which I wrote for the original Patrol4x4 forum. Also, as I have invested real $$ in both RMPO site, and Patrol 4x4, I believe I have the right to copy pretty much as I please. Any-one wants to find an expensive lawyer and prove otherwise is welcome. ****************************************************************************************************************************************************************************************** ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ a work in progress.....more to come. here goes....start of the bible. I will be posting this on other forums too. The home base for this is on my website in the forum, www.rmp-o.com H260 rear diff and C216 locker info well I suppose the place to start is with an ARB rd 71 locker which is to suit a gu petrol manual then you need to dismantle the innards of the locker which isnt very hard at all and insert a thrust piece between the spider gear axis pins one of these pins goes right thru the thrust piece where two are only short and terminate at this thrust piece The thrust piece is of your doing ie you must make it or get it made and hardened It is about 35mm dia and about 35mm long ( these sizes are reached by measuring the old one in your g60 diff and the dia is such that it fits inside the ring of the arb centre piece ) What is important and this caught me out was the centre of the axis pins in the arb diff is about 5 mm closer to the driver side wheel so this means that the new thrust piece must be 5 mm longer than the old one with the extra bit towards the passenger side axle You then, after fitting everything else, upon reassembly trim this 5mm off the short ( driverside ) axle. Sounds confusing I know but it isnt hard and if you want to go ahead with this I can scan a pikky of the arb locker and show you on it In the short term you could go to your local arb dealer and ask to see a exploded diagram of an arb locker with a thrust piece ( some cars still have one ) in it to give you an idea of what I mean. This locker is about 1100 bucks plus air supply and they will tell you it cant be done on a g60 but mine works fine http://groups.msn.co....94013006341417 http://groups.msn.co....91893834386097 http://www.outerlimi....ght=g60 locker http://www.outerlimi....ght=g60 locker http://www.outerlimi....ght=g60 locker http://nissan4wheele....145#2646055145 http://forum.patrol4....ght=g60 locker http://forum.patrol4....ght=g60 locker http://groups.msn.co....16249087421441 http://groups.msn.co....34089877212607 http://groups.msn.co....93418903536414 http://groups.msn.co....05475132069634 http://groups.msn.co....79537356051788
Eddy Posted May 1, 2012 Author Report Posted May 1, 2012 transmission upgrades/swaps Spoke to Mark of Marks 4wd on friday night and told him of the interest there was in a 5 speed for the g60 in the states He said that he still was able to make the 5 speed but he said there was a great deal of work in them and they wouldnt be cheap, but as to a final price he didnt know. It was about 2300 oz dollars when you could get them so who knows. He didnt believe me I think on the amount of people after one and said that he would do a run of 10 min. *EDIT: Marks is now ... for all intents and purposes, non-exesitant, at lkeast in the form I remember. We missed our chance to get hold of the tooling for the 5 speed boxes, so we can give that one up. There are still some coming onto the market from time to time.* http://www.outerlimi....ght=g60 tranny http://rockymountian....ghlight=tranny http://rockymountian....ghlight=tranny http://rockymountian....ghlight=tranny http://nissan4wheele....561#9426050561 http://nissan4wheele....845#9416024845 http://nissan4wheele....983#1886038983 http://nissan4wheele....105#5916041105 http://www.outerlimi....ght=g60 tranny http://www.outerlimi....ght=g60 tranny http://www.pirate4x4....=patrol tranny http://groups.msn.co....05406951320191 http://groups.msn.co....44316635325449 http://groups.msn.co....29263490171602 http://groups.msn.co....29185359037587 http://groups.msn.co....22851638542350 http://groups.msn.co....20799674881114 http://groups.msn.co....10100539020835 http://groups.msn.co....20491192079486
Eddy Posted May 1, 2012 Author Report Posted May 1, 2012 Carbs and fuel system mods/upgrades http://nissan4wheelers.com/eve/ubb.x...01#12010834901 http://nissan4wheelers.com/eve/ubb.x...924#8956007924 http://nissan4wheelers.com/eve/ubb.x...011055&p=1 http://groups.msn.com/nissanpatrolcl...94573474355000 http://groups.msn.com/nissanpatrolcl...71417708771877 http://groups.msn.com/nissanpatrolcl...87631524275662 http://groups.msn.com/nissanpatrolcl...62832496682534 http://groups.msn.com/nissanpatrolcl...90748993164446 http://groups.msn.com/nissanpatrolcl...65297814130187 http://nissan4wheelers.com/eve/ubb.x...381#8496086381 http://nissan4wheelers.com/eve/ubb.x...582#4216098582 http://groups.msn.com/nissanpatrolcl...07990766109041 http://groups.msn.com/nissanpatrolcl...05291678613397 http://groups.msn.com/nissanpatrolcl...08040513771928 http://groups.msn.com/NissanPatrolCl...p;all_topics=1 http://groups.msn.com/nissanpatrolcl...60680730749393 http://groups.msn.com/nissanpatrolcl...37372933930247 http://groups.msn.com/nissanpatrolcl...28894231858386 http://groups.msn.com/nissanpatrolcl...97404422585767 http://groups.msn.com/nissanpatrolcl...93503806111096 http://groups.msn.com/nissanpatrolcl...92847090547338 http://groups.msn.com/nissanpatrolcl...75432291758485
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now