Jump to content

Recommended Posts

Posted

In July 2011 I purchased an Explorer Campers Lawson Off Road camper trailer. I purchased it second hand but it was only 11 & 1/2 months old.

Here are the pics from when I got it..

I've since upgraded the batteries and electronics and purchased extra canvas to complete the annex walls.

post-1-0-76707900-1333175264_thumb.jpg

post-1-0-26103700-1333175286_thumb.jpg

post-1-0-56281000-1333175302_thumb.jpg

post-1-0-29800300-1333175323_thumb.jpg

post-1-0-14187700-1333175342_thumb.jpg

post-1-0-69318800-1333175356_thumb.jpg

post-1-0-50665800-1333175378_thumb.jpg

post-1-0-15267400-1333175396_thumb.jpg

post-1-0-93632800-1333175417_thumb.jpg

post-1-0-42155600-1333175435_thumb.jpg

post-1-0-33836200-1333175455_thumb.jpg

post-1-0-95378100-1333175473_thumb.jpg

post-1-0-01598900-1333175494_thumb.jpg

post-1-0-25956600-1333175512_thumb.jpg

post-1-0-19619500-1333175528_thumb.jpg

Posted

The trailer came with a single 100AH Remco AGM battery which was good for a few days powering the lights and fridge, but I can go for longer so I upgraded to dual Remco 100ah batteries, a Victon Battery Monitor, CTek Dual 250S charger and a Jaycar Pure Sine Wave Inverter - which unfortunatly never gets used.. I might give it the flick. I also have a 120w folding solar panel kit (ebay) and I can now run my CF40 fridge, all my lights, phone charges etc for almost indefinate periods of time - as long as I get mostly sunny days :-)

Ive doubled the number of cig lighter sockets at the rear of the trailer and added an anderson plug for the fridge. Now I can charge everyones phone, run the fridge and some lights all at the same time.

On the side of the front box I installed the Victron monitor and a solar panel input socket (Hella)

post-1-0-26700000-1333175871_thumb.jpg

post-1-0-45182800-1333175895_thumb.jpg

post-1-0-55086800-1333175919_thumb.jpg

post-1-0-48134200-1333175939_thumb.jpg

post-1-0-63446800-1333175964_thumb.jpg

post-1-0-14644800-1333175995_thumb.jpg

post-1-0-63835100-1333176015_thumb.jpg

post-1-0-38689500-1333176038_thumb.jpg

post-1-0-39364100-1333176056_thumb.jpg

post-1-0-84792400-1333176075_thumb.jpg

post-1-0-69970800-1333176090_thumb.jpg

  • 2 weeks later...
  • 3 weeks later...
  • 1 month later...
Posted

Bloody awsome, when combined with the victron battery monitor... Thou, if I had my time over again I would get the full blown redarc BMS - http://redarc.com.au...nagement-system which can be had for under a grand now on ebay.. When you add up the cost of the victron (~~250) the ctek Dual 250 (~$270) and then a 240v battery charger its not quite as high as the BMS, but the BMS would be a more elegant solution.

I also have a BCDC 1220 in my car which charges the 2nd battery in the car. All works perfectly.

Posted

How do you find the drifta draws/kitchen?

I was thinking about getting one made up to replace my home made draws.. the drifter ones look good and are not over priced.

Sent from my Galaxy Nexus using Tapatalk 2

Posted

The drifta kitchen is fantastic - Cant speak highly enough of it.

The pull out draw is also brillent however if I was starting from scratch I would prefer that the trailer had a slide out draw INSIDE the trailer for clothes and a smaller slide out draw at the rear of the trailer with a smaller draw.

Sometimes pulling the draw all the way out to get the stuff right at the back is a pain because it pulls out right up against the bench. Honestly thou, if your trailer is allready built and you want a draw solution the drifta is the go.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...