-
Posts
34 -
Joined
-
Last visited
Everything posted by Big gu
-
Don't waste money on cams and intake the gu has the better intake on it from the 2.8td 3" is a little big I run a 2 1/2 system off a 3" dump with egt in it I have also swapped the pump back to gq and upped the boost to 15 this made a huge diff Mine had a chip installed when I first got it and it's a lot better to drive now full boost by 2000rpm if you are hard on it Sent from somewhere else that isnt here
-
First of all what model is it from I have no cooling problems but have fitted a big rad as I am going up north Sent from somewhere else that isnt here
-
What did you do to your GU today?
Big gu replied to dronus4x4's topic in Nissan Patrol GU/Y61 (GU Patrol, 1999–2016)
Fitted my remote winch controls and looked at my Cav fitter fitting location fitted my UNO filter droppie and pre filter head also got a fitting to hook in the boost gauge after the ic when I fit my boost control -
There's one in a issue of 4wd action not sure what number I'll have a look and let you know but it's mounted up the back near the ic
-
LED Indicators and Park Lights (Bullbar)
Big gu replied to dronus4x4's topic in DIY Modifications & Accessories
That's the number I went hunting and found this is what is supplied from tweaked offroad -
Nice rig sounds like you get a lot of use out of it Have you been down white hills fishing there's some good tracks over the back of the sand dunes
-
As said its a 2.8td not sure if it would work it fuel only
-
What did you do to your GU today?
Big gu replied to dronus4x4's topic in Nissan Patrol GU/Y61 (GU Patrol, 1999–2016)
Sorted out a mechanical pump injectors and other parts needed to convert it back to a mechanical system not electrical Also picked up from mate a big hd natrad radiator for the big girl too -
I'm selling a chip but it's not a chip It I'll have to look under the bonnet to get the name again I'm going back to mechanical on mine so no need for a chip
-
I have seen these but why not run a long strand along the sides and top of. The rear cargo area ,then you don't have to pull wires through to put power onto it I'll take some pics when I finally get mine sorted out with draws etc have bigger problems at this time
-
I'll have one up for sale shortly I'm converting mine back to mechanical (Lin story there)
-
I was supplying Nissan dealers with single mass std clutches when I was running a brake and clutch shop they seemed to loved them off the top of my head they were around the 1200 mark for the kit
-
I WANT ONE !!!!!!!!
Big gu replied to GQ Beast's topic in Nissan Patrol GU/Y61 (GU Patrol, 1999–2016)
Nice didn't come out here so puts should be ok -
Mine runs out the back then forward
-
Well I started work on it I thought bugger it and have put it on an excel spread sheet with every other number I can find what I'm hoping is anything I miss can be added by other member and it made a sticky in its own heading just for part numbers of after market parts that fit your model so far I have all the brake clutch and coolant hoses and filters belts plugs both types of fuel anything else to add to that before I start putting in number
-
Yeah easy as only just touching just don't have a lot of clearance will see what happens when we have our big trip up north in the next month or so
-
Don't leave battery powered devices on your dash
Big gu replied to Ray!'s topic in General Discussion
Damn ok I'll go take mine out now ray That reminds me of the anti smoking ads maybe this one should be anti gps -
Yeah good rig having issues with it at the moment but will sort that out Just have to fit the parts that are piling up at my place so far there is a water trap filter lift pump heavy duty full metal radiator fridge slide for my kitchen in the back led lights for the rear fit out winch remote control pryo gauge hook up dump pipe fitted and the water bladder boxing finished off Then I need to make the decision to fit a long range belly tank before I go away or not All this to do in less than a month so I have time to test
-
I would have jumped at this but I have just started another trade qual so maybe in four years when I finish this one up
-
Sorry yeah scrap I the inside of the wheel a little just removes the paint etc from the caliper
-
It just scraps a little and you can't run the clip because of it I'll get the pattern from my dads kit
-
That kit is not a perfect fit for gu patrols the first kit and prototype is on my old mans car te top of the caliper needs to come in on the drivers side I can give you all the parts numbers so you can source the parts locally if you wanted to
-
Ah ok then saw you were looking at brake upgrades too on the other place
-
Don't know what number we up too but I'll take one for sure People getting away with others people's hard work and rep then leave them out to dry not pay them properly not pay super and still come out like a rose gives me te sh$ts and then the people that only listen to one side and ignore what you say in defence
-
Freedom of speech within the rules of the board and they ban people well I guess it won't be to lone before I join the bad boys club